| NO FLAPS NO SLATS LANDING |
This Topic is relevant to the whole fleet
Initial approach with A/THR in selected speed is recommended. AP is allowed down to 500 ft AGL
Disregard CONF 2 requirement on ECAM status page. Select FLAPS handle at CONF1 to take benefit of SRS guidance in case
of go around. VFE displayed on the PFD depends on the flap lever position, so a false
VFE will be given. Plan a long stabilized approach.
Select VLS from PFD (or VREF + 50 kt if VLS not available). At 500 ft reduce speed to obtain VLS - 5 kt (or VREF + 45 kt if VLS
not available) at touch down.
| -LDG DIST |
|
MULTIPLY BY 1.8 |
|
